Iso 6162-2 pdf
diemunsprobas1975 Share this Post to earn Money ( Upto ₹100 per 1000 Views )
Iso 6162-2 pdf
Rating: 4.7 / 5 (2240 votes)
Downloads: 45112
.
.
.
.
.
.
.
.
.
.
It specifies 5“,0x6,5,7x4,7x10,,1,M16x,ISO (SAE) (1) Other tube dimensions on request. This document also recognizes the need to accommodate metric screw International Standard ISO was prepared by Technical Committee ISO/TC, Fluid power systems, Subcommittee SC 4, Connectors and similar products and This document establishes international standards for flange connections used in hydraulic fluid power systems operating at pressures up toMPa (bar). ISO (E) Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws —MPa (bar), DNto DNWARNING — Users of this document should ensure that suitable material is chosen for the port to maintain the required working pres ISO gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to four-screw, split and one-piece flange clamp type tube connectors and hose fittings for use at a pressure ofMPa (bar[1]) This document gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to four-screw, split and one-piece flange clamp type tube connectors and hose fittings for use at a pressure ofMPa (bar 1) ISO (en) × Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — PartFlange connectors, ports and mounting surfaces for use at a pressure ofMPa (bar), DNto DN PartFlange connectors for use at pressures ofMPa (bar) toMPa (bar), DNto DNWARNING — Users of this part of ISO shall ensure that suitable material is chosen for the port to ISO consists of the following parts, under the general title Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws: PartFlange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (bar) toMPa (bar), DNto DN), DNto DN INTERNATIONAL STANDARD. ISO (E) Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws —. Flange connectors, ports and mounting surfaces for use at a pressure ofMPa (bar), DNto DN WARNING — Users of this document should ensure that suitable material is chosen for the port to maintain ISO (E) Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws —. This part of ISO gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and INTERNATIONAL STANDARD. Flange This part of ISO specifies complete general and dimensional characteristics for flange heads, split flange clamps (FCS), one-piece flange clamps (FC) and ports applicable to ISO gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals. (2) Please advise thread dimension ISO and –2 are proven, leak-free connections, espe-cially suited for larger sizes, high pressures and assembly in tight quarters. Threaded port connections such as SAE ISO (en) Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — PartFlange connectors, ports and ISO (E) Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws —.
