How to replace iPhone 11 Screen Replacement Guide

Materials Needed:

• Replacement screen for iPhone 11
• Small Phillips screwdriver
• Pentalobe screwdriver
• Suction cup tool
• Plastic opening tool
• Tweezers
• Adhesive strips or adhesive glue
• Heat gun or hairdryer (optional)
• Microfiber cloth

Step 1: Power off your iPhone 11

Before you begin the iphone 11 screen replacement, make sure your iPhone is powered off. Press and hold the power button until the "Slide to Power Off" slider appears, and then swipe it to the right to turn off your device.

Step 2: Remove the two bottom screws

Use the pentalobe screwdriver to remove the two screws located at the bottom of your iPhone 11, on either side of the charging port.

Step 3: Separate the screen from the body

Place the suction cup tool on the lower half of the screen, just above the home button. Apply gentle pressure and pull up the suction cup to create a small gap between the screen and the body. Insert the plastic opening tool into the gap and carefully slide it along the edges to separate the adhesive holding the screen in place. Take your time and be cautious not to apply excessive force.

Step 4: Lift the screen assembly

Once you have loosened the adhesive, gently lift the screen assembly from the bottom. Be careful not to pull it too far, as there are delicate cables connecting the display to the iPhone's motherboard.

Step 5: Disconnect the display cables

Locate the four connectors that attach the display cables to the iPhone's motherboard. Use the plastic opening tool or tweezers to carefully disconnect these cables one by one. Take note of their positions for reassembly later.

Step 6: Remove the broken screen

With the display cables disconnected, you can now safely remove the damaged screen from your iPhone 11. Set it aside and prepare the replacement screen.

Step 7: Install the new screen

Carefully align the new screen with the iPhone's body, making sure the cables are positioned correctly. Gently press the screen down to secure it in place, ensuring it sits flush with the body.

Step 8: Reconnect the display cables

Take the connectors from the old screen and reconnect them to their respective ports on the iPhone's motherboard. Be cautious and ensure each cable is properly inserted.

Step 9: Test the new screen

Before fully reassembling your iPhone, power it on and test the new screen. Check for any display issues or touch responsiveness problems. If everything looks good, proceed to the next step.

Step 10: Reassemble and secure the screen

Carefully lower the screen assembly back into place, aligning it with the edges of the iPhone's body. Apply gentle pressure to ensure the adhesive sticks properly. Then, insert the two bottom screws using the pentalobe screwdriver.

Step 11: Clean and polish the screen

Use a microfiber cloth to clean any smudges or fingerprints from the screen. Gently polish the surface until it shines.

Conclusion:

Replacing the screen on your iPhone 11 may seem like a daunting task, but with the right tools and careful execution, it is definitely doable. By following this comprehensive guide, you have taken a significant step towards restoring your iPhone's functionality and aesthetics without incurring the expense of professional repairs.

Remember, patience is key throughout the process. Take your time to ensure each step is executed correctly, and don't rush or apply excessive force that could potentially damage other components.

It's important to note that screen replacements require a certain level of technical skill, so if you feel unsure or uncomfortable, it's always a good idea to seek professional assistance.

Disclaimer: This guide is provided for informational purposes only. We cannot be held responsible for any damage or voided warranties that may occur during the screen replacement process. If you're unsure about any step, it's best to consult a professional technician or Apple support for assistance.