Iso 6162 1 pdf

Iso 6162 1 pdf

Rating: 4.9 / 5 (3989 votes)

Downloads: 21654

CLICK HERE TO DOWNLOAD

.

.

.

.

.

.

.

.

.

.

this second edition cancels and replaces the first edition ( iso: ), which has been technically revised. 1 iso 6162 1 pdf ensure that the flange connection needs to conform to iso 6162- 2, taking into account the maximum working pressure and the dimensional differences between isoand iso 6162- 2. international standard isowas prepared by technical committee iso/ tc 131, fluid power systems, subcommittee sc 4, connectors and similar products and components. this first edition of isotogether with the first edition of isocancel and replace the first edition of iso 6162: 1994, which has been technically revised. this part of iso 6162 gives general and dimensional specifications for flanged heads, split flange clamps ( fcs and fcsm), one- piece flange clamps ( fc and fcm), ports and mounting surfaces applicable to four- screw, split and one- piece flange clamp type tube connectors and hose fittings for use at pressures of 3, 5 mpa ( 35 bar 1) ) to 35 mpa ( 350 bar). • the fl ange adapters and 4 bolt fl ange block fi ttings have o- ring grooves conforming to dimensions in isoand - 2 ( sae j518). ( 2) please advise thread dimension with. iso 6162- 2: gives general and dimensional specifications for flanged heads, split flange clamps ( fcs and fcsm), one- piece flange clamps ( fc and fcm), ports and mounting surfaces applicable to four- screw, split and one- piece flange clamp type tube connectors and hose fittings for use at a pressure of 42 mpa ( 420 bar[ 1] ). in this second edition, property class 8. iso 6162 consists of the following parts, under the general title hydraulic fluid power — flange connectors with split or one- piece flange clamps and metric or inch screws:. 8 screws in accordance with isohave been deleted to avoid the potential problem of a user using. txt) or read online for free. either code iso 6162 1 pdf 61 or code 62 of sae j518 and isoor iso 6162- 2. the 4 bolt flange block fittings have through holes for the mounting bolts, again conforming to isoand - 2 ( sae j518). these connections are intended for application in hydraulic systems on industrial and commercial products where it is desired to avoid the use of threaded connectors. iso 6162- 1: gives general and dimensional specifications for flanged heads, split flange clamps ( fcs and fcsm), one- piece flange clamps ( fc and fcm), ports and mounting surfaces applicable to four- screw, split and one- piece flange clamp type tube connectors and hose fittings for use at pressures of 3, 5 mpa ( 35 bar ) to 35 mpa ( 350 bar). working pressure and the dimensional differences between iso6162- 1 and iso 6162- 2. the flange block fittings ( codes q1b and q2b) have through holes for the mounting bolts, again conforming to sae j518. isowas prepared by technical committee iso/ tc 131, fluid power systems, subcommittee sc 4, connectors and similar products and components. dimensions and pressures for reference only, subject to change. parker sae flanges meet all requirements of isosae j518 code 61), isosae j518 code 62). 3 1/ 2“ 100, 0x6, 0 88, 9x3, 6 88, 9x8, 0 69, 9 120, m16x, 40 4“ 110, 0x6, 0 114, 3x8, 8 114, 3x3, 6 114, 3x6, 02 77, 8 130, m16x, 75 5“ 133, 0x6, 5 139, 7x4 139, 7x10, 0 92, 1 152, m16x, - 1 ( saeother tube dimensions on request. the 4 bolt fl ange block fi ttings have through holes for the mounting bolts, again conforming to isoand - 2 ( sae j518). iso 6162- 1: specifies complete general and dimensional characteristics for flange heads, split flange clamps ( fcs), one- piece flange clamps ( fc) and ports applicable to four- screw, split and one- piece flange clamp type tube and hose connectors for use at pressures of 3, 5 mpa ( 35 bar) to 35 mpa ( 350 bar). of either code 61 or code 62 of sae j518 and isoor iso 6162- 2. the flange adapters and 4 bolt flange block fittings have o- ring grooves conforming to dimensions in isoand - 2 ( sae j518). table u19 — port detail — iso 6162. 1) 1 mpa = 10 bar = 145 psi. iso 6162- 1: hydraulic fluid power flange connections with split or one- piece flange clamps and metric or inch screws part 1: flange connectors, ports and mounting surfaces for use at pressures of 3, 5 mpa ( 35 bar) to 35 mpa ( 350 bar), dn 13 to dn 127. isosae j518 code 61 standard - free download as pdf file (. and isocode 61) or - 2 ( code 62). pdf), text file (. there is no industry standard for the. it also incorporates the technical corrigendum - 1iso: / cor 6162. the flange adapters ( code q1 and q2), and flange block fittings ( codes q1b, q2b and qsb) have o- ring grooves conforming to dimensions in sae j518. they are widely used for leakfree high pressure connections in tight workspaces. iso shall not be held responsible for identifying any or all such patent rights. iso 6162- 1: also recognizes the need to accommodate metric screw fasteners ( type 1), as well as to provide a means to use existing inch screw fasteners ( type 2). 2 for new design, select the flange connector size by the nominal flange size that corresponds to the. iso 6162 — four- bolt flange connection( includes sae j518) note: for assembly procedure and torques, see page t8. parts shall not be interchanged between flange pdf connections that conform to iso.