Iso 6149 1 pdf

Iso 6149 1 pdf

Rating: 4.9 / 5 (3397 votes)

Downloads: 41529

CLICK HERE TO DOWNLOAD

.

.

.

.

.

.

.

.

.

.

m- 16 iso o- ring. this fourth edition cancels and replaces the third edition ( iso 6149- 1: ), of which it constitutes a minor revision. parker offers the iso 6149 male stud end, shown in fig. m- 18 iso o- ring. ports in accordance with this document can be used at working pressures up to 63 mpa ( 630 bar [ 1] ) for non- adjustable stud ends and 40 mpa ( 400 bar) for adjustable stud ends. isois a metric straight thread o- ring port for cartridge valve cavities only. iso 6149- 1: specifies dimensions for metric ports for use with the adjustable and non- adjustable stud ends detailed in iso 6149- 2: and iso 6149- 3:. the changes are as follows: — corrections have been made to references in figure 1 and table 2. ports in accordance with this document can be pdf used at working pressures up to 63 mpa [ 630 bar1) ] for non- adjustable stud ends and 40 mpa ( 400 bar) for adjustable stud ends. this standard contributes to the following. m- 10 iso o- ring. isoconnections for hydraulic fluid power and general use - ports and stud ends with iso 261 metric threads and o- ring sealing - part 1: ports with trun. iso/ tc 131/ sc 4. 90 durometer nitrile is standard for hydraulic applications. dimensions and pressures for reference only, subject to change. stud ends as described in isoand iso 6149- 3. 15° m20 iso o- ring. connections for hydraulic fluid power and general use — ports and stud ends with iso 261 metric threads and o- ring sealing — part 1: ports with truncated housing for o- ring seal. isowas prepared by technical committee iso/ tc 131, fluid power systems, subcommittee sc 4, connectors and similar products and components. txt) or read online for free. pdf), text file (. port plugs in accordance with this part of iso 6149 can be used at working pressures up to 63 mpa ( 630 bar1) ). isofree download as pdf file (. international standard iso 6149- 1: ( e) connections for hydraulic fluid power and general use — ports and stud ends with iso 261 metric threads and o- ring sealing — part 1: ports with truncated housing for o- ring seal 1 scope this document specifies dimensions for metric ports for use with the adjustable and non- adjustable we have no amendments or corrections for iso 6149 1 pdf this standard. revises: iso 6149- 1:. parker and other fluid connector manufacturers are expanding product offering to incorporate the iso 6149 male studs as a standard on many tube fitting products. this document specifies dimensions for metric ports for use with the adjustable and non- adjustable stud ends as described iso 6149 1 pdf in iso 6149‑ 2 and iso 6149‑ 3. port dimensions for sae and iso 6149 ports are given on pages s31 and s32 respectively. m- 14 iso o- ring. this standard is not included in any packages. ( sae 2244- 1/ din 3852, part 3) metric iso 261, “ m” thread. for jis b2351 dimensions,. for cartridge valve cavities only ( see iso 7789) m20x1. this part of iso 6149 specifies dimensions and performance requirements for external hex and internal hex port plugs for use with isoports. iso— metric straight thread o- ring port. iso 6149 o- ring. isoredline iso 6149- 1. g7, on several tube fitting products including: seal- lok, triple- lok, eo, eo- 2, conversion adapters, plugs, etc. this second edition cancels and replaces the first edition ( iso 6149- 1: 1993 ), which has been technically revised. large d22) small d23) d34) d4. a list of all the parts in the iso 6149 series can be found on the iso website. metric straight thread port o- ring. this document was prepared by technical committee iso/ tc 131, fluid power systems, subcommittee sc 4, connectors and similar products and components. iso 6149- 1: - connections for hydraulic fluid power and general use - ports and stud ends with iso 261 metric threads and o- ring sealing - part 1: ports with truncated housing for o- ring seal. this port, utilizes metric parallel threads for mechanical holding power and a sealing method similar to the proven sae straight thread o- ring port. the permissible working pressure depends upon port size, materials, design, working conditions, application, etc. m- 12 iso o- ring. port, iso 6149- 1, be specified in all new hydraulic fluid power applications. this third edition cancels and replaces the second edition ( iso 6149- 1: ), which has been technically revised. m- 22 iso o- ring. specify size and compound ( for option compound only) example: m- 12 iso o- ring ( standard nbr) m- 12 iso viton o- ring ( optional fkm) tube fitting part # m- 8 iso o- ring. iso/ fdis 6149- 1: e) secretariat: ansi. part 1: ports with truncated housing for o- ring seal. this standard has been revised by iso 6149- 1:. table r2 – assembly torques for iso 1179- 1. general technical. status : withdrawn.