Iso 2846 1 pdf

Iso 2846 1 pdf

Rating: 4.6 / 5 (7073 votes)

Downloads: 59951

CLICK HERE TO DOWNLOAD

.

.

.

.

.

.

.

.

.

.

the specified printing conditions ( which use a laboratory printability tester), the defined substrate and a method for testing. adopts iso 2846- 1: to specify the colour and transparency characteristics that have to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. iso 2846- 1: specifies the colour and transparency characteristics that are to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. colour and transparency of printing ink sets for four- colour printing sheet- fed and heat- set web offset lithographic printing. iso 2846- 1: specifies the colour and transparency characteristics that have to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. iso 2846 consists of the following parts, under the general title graphic technology — colour and transparency of ink sets for four- colour. it cancels and replaces iso 2846: 1975 and iso 2845: 1975, of which it constitutes a technical revision. iso 2846- 1: ( e) foreword iso ( the international organization for standardization) is a worldwide federation of national standards bodies ( iso member bodies). iso 2846- 1: graphic technology - colour and transparency of printing ink sets for four- colour printing - part 1: sheet- fed and heat- set web offset lithographic printing. part 1: sheet- fed and heat- set web offset lithographic printing technologie graphique — couleur et transparence des gammes d’ iso 2846 1 pdf encre d’ impression en quadrichromie — partie 1: impression lithographique offset sur feuilles et à bobines international standard isothird editionreference number iso 2846- 1: ( e). full description. the main intention of this code system is the fulfilment of the function fit. colour and transparency of process printing inks for four- colour pdf printing. it also describes the test method to ensure conformance. iso 2834- 1, graphic technology — laboratory preparation of test prints — part 1: paste inks; iso 6588- 1, paper, board and pulps — determination of ph of aqueous extracts — part 1: cold extraction; iso 8254- 1, paper and board — measurement of specular gloss — part 1: 75 degree gloss with a converging beam, tappi method. 1 general for an ink set to conform to this part of pdf iso 2846 each ink shall meet the specification for colour defined in 4. homepage> bs standards> 87 paint and colour industries> 87. graphic technology - - colour and transparency of printing ink sets for four- colour printing - - part 1: sheet- fed and heat- set web offset lithographic printing. standard by international organization for standardization,. international standard isowas prepared by technical committee iso/ tc 130, graphic technology. it provides a system of tolerances and deviations suitable for two features of size types: iso 2846 1 pdf “ cylinder” and “ two parallel opposite surfaces”. for multi- colour printing the inks are mixed by printing primary colours over or next to each other in solid and screen areas. iso 2846- 2: specifies the colour and transparency to be produced by inks intended for four- colour coldset web offset printing when printed under specified conditions pdf on a printability tester. this part of iso 286 gives the internationally accepted code system for tolerances on linear sizes. the work of preparing international standards is normally carried out through iso technical committees. view all product details. characteristics are specified for inks used for sheet- fed, heat- set web and radiation- curing processes. the specified printing conditions ( which use a laboratory printability tester), the defined substrate and a method for testing to ensure conformance. the specified printing conditions ( which use a laboratory printability tester), the defined substrate and a method for testing to ensure. printing inks> bs iso 2846- 1: graphic technology. bs iso 2846- 1: specifies the colour and transparency characteristics that are to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. iso 2846- 1] 4 requirements 4. annex b, describing the history of the development of the colour standard, has been removed and annex e relettered to annex b. each member body interested in a subject for which a technical. information on standard iso 2846- 1. in general, the number of primary colours is optional; for economic reasons, however, not too many primary. iso 2846 consists of the following parts, under the general title graphic technology — colour and transparency of printing ink sets for four- colour printing: ⎯ part 1: sheet- fed and heat- set web offset lithographic. 2, at some percentage of press- ready ink, as well as the specification for transparency defined in 4. 2 colorimetric values.