Iso 11926 pdf

Iso 11926 pdf

Rating: 4.7 / 5 (1193 votes)

Downloads: 59627

CLICK HERE TO DOWNLOAD

.

.

.

.

.

.

.

.

.

.

allowed error 0, 13 mm) ; spot- faced surface must be squared to thread in port;. part 2: heavy- duty ( s series) studends. 6 designation of ports the ports shall be designated by a) ” port” ; b) reference to this part of is0 11926, i. sae jsae straight thread o- ring port ( isofree download as pdf file (. 1 for use with adjustable and nonadjustable stud ends shown in sae j1926- 2 and sae j1926- 3. the male end is fitted with an o- ring. this part of iso 11926 specifies dimensions, performance requirements and test procedures for adjustable and non- adjustable heavy- duty ( s series) stud ends complying with iso 725 and iso 11926 pdf for their related o- rings, for general use and fluid power applications. technical committee : iso/ tc 131/ sc 4. publication date. 1) 1 bar= o, l mpa= io5 pa; mpa = n/ mm* sist iso: 1998. tailed in isand is. international standard. : international standard confirmed [ 90. ai) ( l series) stud ends. the sae straight thread, iso 6149 and jis b2351 ports are all of similar design. for sae j475 thread. this part of sae j1926 specifies dimensions for fluid power and general use ports with inch threads in accordance with asme b1. this part of iso 11926 specifies dimensions for ports with inch threads complying with iso 725 for use with the adjustable and non- adjustable stud ends detailed in isoand iso. the male end is fitted with an o- ring. it also specifies test methods and the designation of these ports. table u18 — port detail — sae jisonominal tube od is shown for the standard inch sizes and the conversion to equivalent millimeter sizes. part 1: ports with o- ring seal in truncated housing. status : published. sae j1926- 1 — sae straight thread o- ring port ( isoconforms to ms16142. is011926 consists of the following parts, under the general title con-. is: 1995( e) 0 is0 5 test methods ports shall be tested along with stud ends in accord- ance with the test methods and requirements given in isand is. pdf) or read online for free. therefore this version remains current. this standard was last reviewed and confirmed in. preview this standard in our online browsing platform ( obp) general information. this part of sae j1926 specifies dimensions, performance requirements, and test procedures for adjustable and nonadjustable light- duty ( l series) stud ends with iso 725 threads for use in fluid power and general applications and the o- rings pdf used with them. ) un/ unf threads. 4 dimensions ports shall conform to the dimensions shown in figure 1 and given in table 1. on assembly, the o- ring is firmly sandwiched between the angular. sae straight threads ( sae j1926 / iso 11926) • iso ( iso 6149) • jis ( jis b2351) • bspp flat face ( iso 1179) • din metric flat face iso 11926 pdf ( iso 9974). for the purposes of this part of is0 11926, the defi- nitions given in is0 5598 apply. on assembly, the o- ring is firmly sandwiched between the angular. it also specifies the designation of these stud ends. part 3: light- duty ( l series) studends. international standard 0 iso is0 11926= 2: 1995( e) connections for general use and fluid power - ports and stud ends with is0 725 threads and o- ring sealing - part 2: i heavy- duty ( s series) stud ends 1 scope this part of is0 11926 specifies dimensions, per- formance requirements and test procedures for ad-. sae straight threads ( sae j1926 / iso 11926) • iso ( iso 6149) • jis ( jis b2351) • bspp flat face ( iso 1179) • din metric flat face ( iso 9974). this part of iso 11926 specifies dimensions for ports with inch threads complying with iso 725 for use with the adjustable and non- adjustable stud ends detailed in isoand iso. this part of iso 11926 specifies dimensions, performance requirements and test procedures for adjustable and non- adjustable heavy- duty ( s series) stud ends with iso 263 inch threads and for their related o- rings, for fluid power and general use applications. ai) ( s series) stud ends. nections for genera/ use and fluid power - ports and stud ends with is0 725 threads and o- ring sealing: part1: ports with o- ring seal in truncated housing. it also speci- fies test methods and the designation of these ports. does not conform to ms. ports in accordance with this part of is0 11926 may be used at working pressures up to 63 mpa ( 630 bar” ) for non- adjustable stud ends, and 40 mpa ( 400 bar) for adjustable stud ends. connections for general use and fluid power - ports and stud ends with is0 725 threads and o- ring sealing - iteh part standard 2: preview heavy- duty ( standards. connections for general use and fluid power - ports and stud ends with is0 725 threads and o- ring sealing - iteh standard part 3: preview light- duty ( standards. specifies dimensions for ports with inch threads for use with the adjustable and non- adjustable stud ends. this part of iso 11926 specifies dimensions, performance requirements and test procedures for adjustable and non- adjustable light- duty ( l series) stud ends complying with iso 725 and for their related o- rings, for general use and fluid power applications. o- ring sealing; d3 diameter must be concentric to thread ( max.