Dyne Test Pen Octagon Solutions

Measurements of surface tension ensure that substrates, coatings, and inks adhere to each other in a compatible manner. Depending on the kind, size, and level of measurement that is required, a wide range of products are available to assist. Dynes/cm is the measurement of surface tension. The surface tension needs to be roughly the same as that of the substrate in order to allow for the best compatibility with inks on that substrate. When printing on non-porous materials like polymer and plastic substrates, the surface must be treated so that the surface tension reaches a specific point.

Both the actual surface tension level and simple go/no go dyne pens that can indicate when a surface is at a known level can be determined using our pens and liquid solutions.

Dyne Test Pen 

This liquor-based Polymer-Ink dyne pen is frequently utilized as a "treat/no treat" test pen on polyethylene and polypropylene film. Accessible with one or the other blue or red ink, the non-malignant dyne arrangement is exceptionally dim and more harmless to the ecosystem than standard pens. Accessible just as a 38-40 territory pen, it is planned for individuals who ordinarily just utilize one pen (instead of those testing over an expansive reach). The dyne pens have a multi-month time span of usability.

 Dyne Test Pen Liquid

The CON-TROL-CURE Liquid Dyne Pen's spring-valve tip design keeps the pen's instrument away from the dyne liquid storage to forestall defilement. Press the tip solidly down to open the valve and flood the tip with fresh liquid. Accessible in sets of 8 pens from 30 to 44 dynes/cm (30, 32, 34, 36, 38, 40, 42, 44) and from 46 to 60 dynes/cm (46, 48, 50, 52, 54, 56, 58, 60); also accessible by special request at any level from 30-60 dynes/cm. The dyne pens have a multi-month shelf life.

Dyne Pen Test Set - 36 to 48 Dynes

This 6-pen sorcery marker-type pen set rapidly and successfully verifies whether a substrate is treated from 36 up to 48 dynes/cm. In the event that the material is appropriately treated, the applied dyne mark is uniform, resulting in a continuous and homogeneous shaded line. On the off chance that the material is insufficiently treated, the line of the dyne test retracts as small globules until the imprint almost disappears. The set includes pens in 6 levels: 36, 38, 40, 42, 44, and 48 dynes/cm. half-year shelf life.

Liquid Dyne Test Solution

Dyne Test Solutions are another way printers, converters and extruders can decide surface energy levels. Going from 30-60 dynes/cm, these solutions offer an easy and successful strategy for testing. By wetting the tip of a cotton implement with one of the mixtures and spreading a line over the test specimen, users can confirm treatment in 2 seconds or less. Assuming the continuous line holds for 2 seconds or more, users can be assured that the material is blessed to receive inside 1 dyne of that specific solution.

Proceeding to test various levels in the ascending requests will permit the user to decide the fitting degree of treatment eventually. Assuming the continuous film breaks into droplets in under 2 seconds, the material is insufficiently treated. Users must keep on testing in a descending sequence to decide the treatment level. Utensils must be changed after each test.

FEATURES:

• Wide variety of testing levels

• 30-60 dynes/cm

• Applies easily with a cotton applicator

• 6-month shelf life

• Sold/100cc bottle

Related Post:-

38 dyne test pen, corona dyne test pen, dyne pen price, dyne pen test

test pens dyne, dyne test pen, dyne test pen india, dyne test pen set